GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
Modifications reserved. No liability for printing errors
12/2010
0062196
16
Cut down the servo output levers to the shape shown in the photo, centre the servos
from the transmitter, and push the output arms onto the servo output shafts.
Screw the servos to the RC plate, then glue the plate in the fuselage, positioned as
shown in the photo below.
The flight battery can be fixed to the battery plate using Velcro (hook-and-loop) tape.
Once you have established the correct Centre of Gravity, mark the battery’s position
using a pencil.
Installing the catapult hook
The catapult hook is required for the launching aid for the
Alpina 3001 Champ
ELEKTRO
. It is installed in a similar manner to the towhook, except that the hole
position should be 150 mm from the point of the fuselage nose.
