background image

4 / 28

S5012_Alpha_110_jh_V1

TEST VERSION, DO NOT USE FOR PRINTING

Introduction

Thank you very much for purchasing a 

Graupner

 

Quadrocopter 

Alpha 110

. This 

Alpha 110 Quadrocopter

 is extremely versatile. This 

manual is valid for all speed controllers listed on the cover sheet.
Read this manual carefully to achieve the best results with your 

Alpha 110 Quadrocopter

 and first of all to safely control your mod-

els. If you experience any trouble during operation, take the 

instructions to help or ask your dealer or 

Graupner

 Service Cen-

tre.
Due to technical changes, the information may be changed in 

this manual without prior notice. Be always updated by check-
ing periodically on our website, 

www.graupner.de

 to be always 

uptodate with the products and firmwares.
This product complies with national and European legal require-

ments.

To maintain this condition and to ensure safe operation, you must 

read and follow this user manual and the safety notes before using 

the product!

 Note 

This manual is part of that product. It contains important information 

concerning operation and handling. Keep these instructions for future 

reference and give it to third person in case you gave the product.

Service Centre

Graupner Central Service

Graupner/SJ GmbH
Henriettenstrasse 96
D-73230 Kirchheim / Teck

Email: [email protected]

   

Servicehotline

   

 (+49) (0)7021/722-130

   Monday - Thursday
   9:15 am - 5:00 pm
   Friday
   9:15 am - 1:00 pm

Graupner USA 

OPENHHBBY LLC

3245 University Ave

Suite 1520

San Diego, CA 92104

Website: www.graupnerusa.com

Phone: +1 855-572-4746

Email:[email protected]

Graupner 

in Internet

 

  For the service centers outside Germany please refer to our web 

site 

www.graupner.de

Summary of Contents for Alpha 110 Q





























Reviews: