Assembly instructions
•
Glue the front motor mount support (part 2) to the
central hull wing (part 1). The plate should be
positioned flush on all sides.
•
Use UHU por to glue the front and rear hull
reinforcements (parts 3 + 4) to the central hull
wing. The front hull wing (part 5) can now be glued
to the rear hull wing (part 7).
•
Glue the rear motor mount support (part 6) to the
rear hull wing (part 7); the plate should be fitted
flush on all sides. The rear hull wing can now be
glued to the other wing unit.
•
Glue the motor mount former (part 8) to the hull
wing using UHU por.
•
Sand the motor mount tube (part 9) at an angle so
that it rests flush on the mount plate. The inside of
the angled end of the tube is now elliptical in
shape, matching exactly the oval opening in the
motor mount support.
•
Set the tube central relative to the longitudinal
axis of the machine, and glue the tube securely to
the plywood parts using cyano. NOTE: take care
that no standard cyano makes contact with the
Depron, as it will dissolve the material!
GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
Keine Haftung für Druckfehler. Technische Änderungen vorbehalten! No liability for printing errors. We reserve the right to introduce modifications. Sous réserve de modifications! Nous ne sommes pas responsables
d’éventuelles erreurs d’impression!
#56543
08/2005
20
