1-4
Vertigo XG Installation & Quick Start Guide
Introduction
Overview of the Vertigo XG chassis
The Vertigo XG unit is a 3RU rackmount rendering platform that incorporates redundant fans,
two power supplies, and 1 TB RAID1-enabled storage (optional 2 TB RAID10 expansion).
The only visible difference between the two models of the Vertigo XG is that the single channel
model (
XG21-e
) has only one (1) discrete AES audio connector, while the dual channel model
(
XG22-e
) has two (2) discrete AES audio connectors.
In some cases, the positioning of the connectors on the Vertigo XG’s rear panel differs
depending upon the hardware options installed. See
page 1-3
for a list of the Vertigo XG’s
hardware options.
The following table summarizes the Vertigo XG’s physical dimensions and power
consumption:
Consult the following sections to familiarize yourself with the Vertigo XG’s front and rear panel
components:
•
“Front panel components” on page 1-5
•
“Rear panel components” on page 1-6
Chassis
F
ORM
: 3U rackmount chassis
H
EIGHT
: 5.2” (132 mm)
W
IDTH
: 17.7” (450 mm)
D
EPTH
: 25.5” (648 mm)
Power consumption
AC input
: 100 - 240V, 50 - 60 Hz
Consumption
: 4.05 - 1.73A
Power
: 410 max.
Temperature
Ambient temperature
: 35 C
Note: This shall be the maximum internal
temperature within the rack in which the
Vertigo XG unit is installed.
°
