GRASS VALLEY Profile XP PVS1000, Service Manual

Page: 125 / 172

Viewing the NetCentral Lite main window
23 July 2004 Profile XP Service Manual 125
Responding to messages
NetCentral Lite notifies you immediately if your media platform reaches a
status-level of alarm or warning by popping up the main window and sounding an
audible beep. Other actions can be triggered as well, such as sending an e-mail
message. For information on triggering other actions, see “Configuring actions and
notifications” on page 138
The message displayed in the NetCentral Lite window offers suggestions as to what
you might do to resolve the condition that triggered the warning or alarm, as in the
following example:
In most cases you will want to act immediately to resolve warning or alarm
conditions. Refer to the appropriate section in this manual.
Once the condition is resolved, NetCentral Lite will send an informational message to
notify you that the device has returned to normal status, as in the following example:
To clear alarms
To turn off beeps, click the
Cancel Actions
button or choose
File | Cancel Actions
. This
turns off the audible alarm while you take steps to correct the problem.
Once the action has been cancelled or is finished, the only indication that the warning
or alarm condition still exists will be the color of the system tray icon and the message
and status icons on the NetCentral Lite window. NetCentral Lite itself will not send
messages or trigger actions again to remind you of a current warning or alarm
condition. However, with the “Resend Messages” feature on the Profile XP Media
Platform, that you can configure to have the Profile XP system send a message again
for an unresolved condition.
If some messages become troublesome because they are too frequent or unimportant,
you can set the NetCentral II system to always ignore certain messages. For more
information, see “Ignoring messages” on page 137.