GRASS VALLEY PERFORMER, Instruction Manual

Page: 73 / 182

2-41
Installation Reference
Switch Reference
Table 2-6 lists potential settings and effects for switches used to
configure the Performer. The switches are located on the VAA
Board of the Performer switcher.
The table shows default settings in bold italic print. Address and
Starting Level default values are both zero (0). In the table, O = an
open
or
off
switch segment; C = a
closed
or
ON
switch segment.
For Switch 5, R = right direction; L = left direction.
Table 2-6. Switch Reference, S1, 2, and 3 in Performer Switcher
Effect Switch
Segments
1 2 3 4 5 6 7 8
7 Data Bits S3 C Selectable for ASCII and Model 200
protocols only. Other protocols are
always 8 data bits.
8 Data Bits S3 O
300 Baud S3 O O O `
600 Baud S3 O O C
1200 Baud S3 O C O
2400 Baud S3 O C C
4800 Baud S3 C O O
9600 Baud S3 C O C
19.2K Baud S3 C C O
38.4K Baud S3 C C C
76.8K Baud S3 O O O
No Parity S3 O O
Even Parity S3 O C
Odd Parity S3 C O
VI Internal,
send external S2 O C
VI Internal,
don’t send
external S2 O O
VI S2 C 0
* 1. Address values are cumulative and are added into the total when the switch is in the
Closed (ON) position. In default 20-TEN compatible protocol, S1 is a source, destina-
tion, level offset determinant (see pages 2 - 54, 55, 56). Default address offset is 000.