GRASS VALLEY LDK 8300 -, User Manual

Page: 88 / 110

88 LDK 8300 High-speed HD camera User’s Guide (v4.0)
Chapter 6 - Menu structure and contents
Gain + (dB) 3dB , 6dB, 9dB Selects gain value for + preset. User 2 Oper
Gain ++ (dB) 6dB , 9dB, 12dB Selects gain value for ++ preset. User 2 Oper
Gain +++ (dB) 12dB , 15dB, 18dB Selects gain value for +++ preset. User 2 Oper
AutoWhite
Awb Speed 0..99 (4) Sets the speed for the auto white balance
procedure. Service -
Awb Gain 0..99 (10) Sets the gain value for the auto white
balance procedure. Service -
Timing
H.Phase 0..99 (50) Sets the horizontal phase output signal. User 0 -
V-Shift Off , On Turns V-shift on or off. Used to synchronize
the camera with DLP type projectors or to
hide the horizontal bar of CRT monitors.
Only available for a limited number of video
modes. User 0 Scene
V-Shift Level 0..99 (0) Sets the variable video delay from 0 to 1
frame. User 0 Scene
PCI id 0..8 (1) Selects ID for external PC operation. Service -
Main text insert Auto , On, Off Selects VF text insert mode:
Auto = inserts VF text at the Base Station
video output when activated from the OCP/
MCP;
On = always inserts VF text;
Off = never inserts VF text. User 3 -
Extern Output EXT1 , EXT2, EXT3 (Only for Fiber adaptor) User 3 Oper
Buttons
Ext2 Assign EXT2 , EXT3 (Only for HD Fiber adaptor)
Assigns Ext2 (no change) or Ext3 video
input to the Ext2 input. User 0 Oper
SW1 Call, EXT1 , EXT2 Assigns a function to Switch 1:
Call = activate call signal;
EXT1 = switch to external signal 1
EXT2 = switch to external signal 2 User 0 Oper
SW1 Control Mom. , Alt. Selects behaviour of Switch 1:
momentary or alternating.. User 0 Oper
SW2 EIris, FocAst, EXT1, EXT2 Assigns a function to Switch 2:
EIris = Turns extended auto iris on or off
FocAst = Turns focus assist on or off
EXT1 = switch to external signal 1
EXT2 = switch to external signal 2 User 0 Oper
SW2 Control Mom. , Alt. Selects behaviour of Switch 2
momentary or alternating.. User 0 Oper
VTR Start
PROD
, ENG , Zoom,
EXT1, EXT2
Assigns a function to VTR Start switch:
PROD = Production intercom;
ENG = Engineering intercom;
Zoom = Viewfinder zoom function;
EXT1 = switch to external signal 1;
EXT2 = switch to external signal 2. User 1 Oper
Install Values Description Level File