manualshive.com logo in svg

GRASS VALLEY LDK 8300 -, User Manual

Share
Download
GRASS VALLEY LDK 8300 - User Manual Download Page 28

28

LDK 8300 High-speed HD camera User’s Guide (v4.0)

Chapter 2  - Installation

2.9  Packing for return

If a unit is being returned to Grass Valley for servicing, try to use the containers and materials 
of the original packaging. Attach a tag indicating the type of service required, return address, 
model number, full serial number and the return number which will be supplied by your Grass 
Valley service centre.

If the original packing can no longer be used, the following general instructions should be used 
for repacking with commercially available materials:

1.

Wrap unit in heavy paper or plastic.

2.

Use a strong shipping container.

3.

Use a layer of shock-absorbing material around all sides of the unit to provide firm 
cushioning and prevent movement inside container.

4.

Seal shipping container securely.

5.

Mark shipping container FRAGILE to ensure careful handling.

Summary of Contents for LDK 8300 -















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands