manualshive.com logo in svg

GRASS VALLEY LDK 8300 -, User Manual

Share
Download
GRASS VALLEY LDK 8300 - User Manual Download Page 13

LDK 8300 High-speed HD camera User’s Guide (v4.0)

13

Chapter 1 - Introduction

Chapter 1

Introduction

1.1  Welcome

The LDK 8300 is a high-speed, HD multi-format digital camera head using three 2/3-inch HD-
DPM

+

™ sensors. Combined with the Grass Valley LDK 5880 HD Fiber adapter and the 

LDK 4583 High-speed Base station, the camera head forms a flexible camera system that is 
equally at home in the studio or out on location. The camera system can capture and deliver 
HD images at single, double or triple speed frame rates.

1.1.1  About this manual

The purpose of this manual is to present a detailed description of how to operate the 

LDK 

8300

 camera equipped with a dockable transmission adaptor. It provides the information 

necessary to use the camera in different configurations and with various attachments. With 
this manual it is possible to discover all the operating features of the camera and so use it to its 
full potential. 

This guide is so designed that it can be used as an introduction to those who are new to the 
camera, as a simple procedural guide to those who wish to set-up and start shooting 
immediately, and as a reference work to be consulted as required during the long life of the 
camera.

1.1.2  Related documents

Before proceeding, check the Grass valley website at www.grassvalley.com for the latest 
version of this user’s guide and additional information:

•

Online versions of documentation; updated versions of user’s guides, data sheets, 
brochures, application notes in pdf-format are available for download.

•

Software downloads; camera software updates, release notes and installation instructions 
are available for download.

Summary of Contents for LDK 8300 -















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands