manualshive.com logo in svg

GRASS VALLEY LDK 8300 -, User Manual

Share
Download
GRASS VALLEY LDK 8300 - User Manual Download Page 31

LDK 8300 High-speed HD camera User’s Guide (v4.0)

31

Chapter 4 - Operating instructions

Chapter 4

Operating instructions

4.1  Using the camera

Attach a lens, viewfinder, microphone and any other accessories to the camera. Attach the 
Hybrid fiber cable or supply the adapter with power.

4.1.1  Switching on the power

1.

On the Base Station set the master power switch to the on position (

I

). The green power 

light lights. 

2.

Set the camera 

Power 

switch of the camera to the on position 

.

3.

Allow a few moments for the camera to perform a self-test and for the system to 
establish communications. 

☞

Note

 

☞

Note

 

To switch the camera to stand-by, set the 

Power 

switch of the camera to the 

 position.

4.1.2  Controlling the camera

There are several ways of controlling the camera:

•

Using a Master Control Panel (MCP 400) connected to the C2IP network or Base Station.

•

Using an Operational Control Panel (OCP 400) connected to the C2IP network or Base 
Station.

•

Using the switches on the camera itself.

•

Using the menu system to select functions.

☞

Note

 

☞

Note

 

If you cannot access some camera functions or you wish to restrict access, refer to 

“Access 

and security” on page 51

.

Summary of Contents for LDK 8300 -















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands