LDK 8300 High-speed HD camera User’s Guide (v4.0)
35
Chapter 4 - Operating instructions
4.3.3 Leaving the System Menu
If you are deep within the menu structure, the recommended way of leaving the System menu
is:
1.
If necessary move the cursor to the left column with the
Select
button
.
2.
Scroll upwards with the
Rotary
control
until the cursor points to
TOP
(this is the
MAIN
menu).
3.
Press the
Select
button
. The cursor now points to the
MENU OFF
item of the
MAIN
menu.
4.
Press the
Select
button
to leave the System menu.
If you do not use the menu it disappears after a few seconds. (This delay can be programmed
in the
VF
menu.) However, when you press the
Select
button
again you enter the System
menu at the last position of the cursor and not at the top of
MAIN
menu. To prevent confusion
the next time you enter the System menu, it is advisable to leave the menu by returning to the
MAIN
menu (TOP) and selecting
MENU OFF
.
4.3.4 Making changes
To find out where you have to go to change a function, consult the appendix to discover under
which menu group or sub-group the function you want to change is located. If the cursor points
to an item (and there are no double arrows to indicate a sub-menu) then the item pointed to
has a value. The value can be:
•
a toggle value (only two values)
•
a list value (more than two values)
•
an analog value (variable from 00 to 99)
•
unavailable (---).
If the value is unavailable it cannot be changed. This is indicated by three dashes (---). This can
occur, for example, when a function is switched off. The analog values associated with that
function are then unavailable.
If there are only two values associated with the function, then pressing the
Select
button
toggles between these two values. If a value is displayed next to a function that is one of
several possible values, then pressing the
Select
button
places the cursor in a list menu
indicating the value currently selected. Use the
Rotary
control
to point to a new value. Press
the
Select
button
to return the cursor to the function list.
If an analog value is displayed next to a function name, then pressing the
Select
button
places
the cursor in front of the value and the
Rotary
control
is used to change the analog value.
Press the
Select
button
to return the cursor to the function list.
4.3.5 Undoing changes
If you make changes to the video settings in the Systems menu and you decide not to keep
them, use the
Standard button
at the side of the camera to recall a standard set of values for
the video parameters.
Summary of Contents for LDK 8300 -
