GRASS VALLEY K2 FCP CONNECT -, Installation Manual

Page: 17 / 52

Comment Task
Enter Macintosh devices in hosts fi les. Con fi gure hosts fi les on the stand-alone
K2 system
This is not necessary if the Macintosh
system logs on with the default K2 Create a Macintosh user account. This
is the account that the Macintosh
system uses to log on to the K2 system.
administrator account
(administrator/adminK2)
— Share V: drive as
default
.
On all Macintosh client computers
Comment Task
— Install Final Cut Pro, if not already
installed.
The software install fi le is
K2FCPConnect.pkg
.
NOTE: Before installing the software,
you must be logged in as a user with
administrative privileges on the domain.
Install K2 FCP Connect software.
Only the control network connection is
necessary. Cable network connections.
— Con fi gure for control network, if not
already done.
Copy in host table information from the
stand-alone K2 system's hosts
fi le.
Con fi gure the hosts fi le for
networking.
In the Name fi eld, enter
<K2_name>/<username>.
Mount the K2 system's volume
default
.
Ignore "...could not start the fi le system
service..." error message.
Set the license server to the
stand-alone K2 system and verify
license status.
Final tasks
Comment Task
Launch Final Cut Pro and open GV
Connect. GV Connect automatically Test connection
detects and displays K2 storage that is
mounted as a volume on the Macintosh
system.
22 October 2010 K2 FCP Connect Installation Manual 17
Installing and con fi guring K2 FCP Connect