Comment
Task
Use Xbench.
Optional: Verify bandwidth.
—
Con
fi
gure HotBin on the stand-alone
K2 system to receive
fi
nished Final Cut
Pro
fi
les.
The Aurora system must be operational
and available to the Macintosh system.
If using an Aurora work
fl
ow, con
fi
gure
your Aurora system.
K2 SAN System Requirements
To support K2 FCP Connect your K2 SAN must meet requirements as follows. Products
and versions listed are the minimum required at the time of this writing. Some
product/component versions have dependencies on others. Refer to compatibility
matrix information in release notes for complete and updated requirements.
•
K2 SAN devices with K2 software at a 3.x version of 3.3.1 or higher, or a 7.x
version of 7.1.9 or higher.
•
On K2 SAN K2 Media Servers (FSMs), the SNFS con
fi
guration
fi
le must be
con
fi
gured to
GlobalSuperUser Yes
.
•
The K2 SAN must have unused bandwidth suf
fi
cient to support the Mac clients.
•
Storage must be K2 Lx0 RAID. K2 Level 2, 3, and 4 RAID not supported.
•
For Aurora Playout, requires Aurora Playout system with XMOS interface.
Macintosh System Requirements
To support K2 FCP Connect for connection to a K2 storage, your Final Cut Pro
Macintosh systems have requirements as follows. Products and versions listed are the
minimum required at the time of this writing. Some product/component versions have
dependencies on others. Refer to compatibility matrix information in release notes for
complete and updated requirements.
•
MacPro
•
Intel processor
•
Two GigE ports
•
Mac OS X 10.6. Dependency on other versions. Refer to release notes.
•
Final Cut Pro version 6.0.5 or higher. Dependency on other versions. Refer to
release notes.
•
Apple Xsan 2.2. Dependency on other versions. Refer to release notes.
If using CIFS mount only for access to K2 storage, Mac Book Pro with one GigE port
is supported.
18
K2 FCP Connect Installation Manual
22 October 2010
Installing and con
fi
guring K2 FCP Connect
Summary of Contents for K2 FCP CONNECT -
Page 44: ......
