GRASS VALLEY K2 FCP CONNECT -, Installation Manual, Page: 30 / 52

10. Save this email in case you ever need to re-image this machine.
Next add the license to the SabreTooth License Manager.
Adding a license
Your software license,
Licenses_<SalesNumber>.txt
, is provided as a text fi le. Use
the License Manager to add this fi le to your system and enable the desired feature.
1. Click on the License Manager icon on the Windows Desktop.
The SabreTooth License Manager opens.
2. Do one of the following:
• Choose
File | Import License
and navigate to the fi le location to open the text
fi le.
• Drag and drop the text fi le onto the License Manager.
You will now see the permanent license in SabreTooth, as well as any other
licenses, permanent or temporary, that have been installed on this machine.
You should save the permanent license to a backup system.
Enable SabretoothWS service
Do this task on the K2 system that is your Sabretooth licensing server for access to
stand-alone K2 systems.
1. Open the Windows
Services
control panel.
2. Right-click
Grass Valley SabretoothWS
, open
Properties
and click the
General
tab.
3. Set Startup Type to
Automatic
.
4. Click
OK
to save settings and close.
Add Macintosh systems to K2 system hosts file
1. On a K2 system, open the hosts fi le in a text editor.
2. Following the convention in the hosts fi le, enter text in one line for each Final Cut
Pro Macintosh system as follows:
a) On a text line, type a Macintosh system's control network IP address.
b) Use the TAB key or Space bar to insert a few spaces.
c) On that same text line after the space, type the machine name, such as
MacClient01.
The machine name cannot have any spaces in it.
This sets up the host fi le for resolving the machine name on the control network.
30 K2 FCP Connect Installation Manual 22 October 2010
Installing and con fi guring K2 FCP Connect