manualshive.com logo in svg

GRASS VALLEY FGAEY 1312, User Manual, Page: 65 / 71

Share
Download
GRASS VALLEY FGAEY 1312 User Manual Download Page 65

Issue 1 Revision 1 

Page 45 

Appendix A  MV-801 Specification

A.1 Physical/Electrical 

A.2 Inputs 

 

Power

Power consumption

200 W

MV-801 hardware modules are powered by the hosting Sirius 
800 router frame.

Check with Grass Valley support to ensure that your Sirius 
router power supply configuration and router module config-
uration can support the MV-801.

Operating Temperature

5 to 30 ºC ambient.

See 

Note 1

.

Weight:

Front Module

3.5 kg 

Rear Panel

0.75 kg 

Note 1:

The MV-801 operating temperature range is lower than that of a 
Sirius 800 host router.

Refer to the Sirius 800 User Manual for the router frame 
operating temperature range.

Signal

Internal from Sirius Router 
Inputs

48 off internal inputs from router. 

Selectable from all router inputs. 

(For router destination number mapping, see Table 11 on 
page 40.)

Note: 

There are only 44 inputs available to an MV-801 fitted into 

the upper slot of a Sirius 840 router frame.

Summary of Contents for FGAEY 1312








































































Reviews:

No comments