manualshive.com logo in svg

GRASS VALLEY FGAEY 1312, User Manual, Page: 2 / 71

Share
Download
GRASS VALLEY FGAEY 1312 User Manual Download Page 2

ii

Notices

FCC Compliance

In order to comply with FCC/CFR47: Part 15 regulations, it is necessary to use high-quality, 
triple-screened Media or Monitor cable assemblies with integrated ferrite suppression at both 
ends.

Patent Information

This product may be protected by one or more patents.

For further information, please visit: 

www.grassvalley.com/patents/

Copyright and Trademark Notice

Grass Valley

®

, GV

®

 and the Grass Valley logo and/or any of the Grass Valley products listed in 

this document are trademarks or registered trademarks of GVBB Holdings SARL, Grass Valley 
USA, LLC, or one of its affiliates or subsidiaries. All other intellectual property rights are owned 
by GVBB Holdings SARL, Grass Valley USA, LLC, or one of its affiliates or subsidiaries. All third 
party intellectual property rights (including logos or icons) remain the property of their 
respective owners.

Copyright © 2020 - 2020 GVBB Holdings SARL and Grass Valley USA, LLC. All rights reserved.

Specifications are subject to change without notice.

Terms and Conditions

Please read the following terms and conditions carefully. By using  documentation, you agree 
to the following terms and conditions.

Grass Valley hereby grants permission and license to owners of  to use their product manuals 
for their own internal business use. Manuals for Grass Valley products may not be reproduced 
or transmitted in any form or by any means, electronic or mechanical, including photocopying 
and recording, for any purpose unless specifically authorized in writing by Grass Valley.

A Grass Valley manual may have been revised to reflect changes made to the product during its 
manufacturing life. Thus, different versions of a manual may exist for any given product. Care 
should be taken to ensure that one obtains the proper manual version for a specific product 
serial number.

Information in this document is subject to change without notice and does not represent a 
commitment on the part of Grass Valley.

Warranty information is available from the Legal Terms and Conditions section of Grass Valley’s 
website (

www.grassvalley.com

).

Title

MV-801User Manual

Part Number

RMY3 MV-801-UM    Issue 1 Revision 1

Revision

2020-10-21, 15:12

Summary of Contents for FGAEY 1312








































































Reviews:

No comments