manualshive.com logo in svg

GRASS VALLEY FGAEY 1312, User Manual, Page: 3 / 71

Share
Download
GRASS VALLEY FGAEY 1312 User Manual Download Page 3

iii

MV-801

User Manual

Read Me First

Thank you for purchasing your new MV-801 product from Grass Valley. 

The MV-801 contains a powerful multiviewer.

When using the MV-801 you will need access to the following Grass Valley documents, 
available from the Grass Valley website:

1 This manual - 

MV-801 Integrated Multiviewer User Manual

2

MV-8 Series Core Multiviewer User Manual

 - which provides information about the MV-

801’s core multiviewer features, control screens, ‘getting going’ instructions, and 
maintenance.

About this Manual

This MV-801 user manual describes how to install, configure and operate the MV-801 
multiviewer in the Sirius 830, 840 and 850 routers. 

Refer to the 

MV-8 Series Core Multiviewer User Manual

 for information about the MV-801’s core 

multiviewer features, control screens, ‘getting going’ instructions, and maintenance.

Refer to the appropriate Sirius 800 Router Installation Manuals for details on how to unpack, 
install and test a Sirius 800 router. Refer to the Sirius 800 Router User Manual for router details. 
Some of the safety warnings and cautions given the Sirius 800 manuals are repeated in this 
MV-801 user manual and are provided herein for information.

If you have any questions regarding the installation and setup of your product, please contact 
Grass Valley Customer Support. See 

Grass Valley Technical Support

, on page 51, for contact 

details.

Related Documents

The following Grass Valley manuals are related documents: 

Related Document 

Description

MV-801 User Manual (This document)

Describes MV-801 multiviewer.

MV-8 Series Core Multiviewer User Manual

User manual for the core multiviewer ‘engine’ 
within all MV-8XX Multiviewer products, 
including the MV-801.

Sirius 800 Router User Manual

User manual for Sirius 800 series routers.

Sirius 830, Sirius 840, and Sirius 850 
Installation Manuals

Installation manuals for Sirius 800 series routers.

Summary of Contents for FGAEY 1312








































































Reviews:

No comments