manualshive.com logo in svg

GRASS VALLEY FGAEY 1312, User Manual, Page: 57 / 71

Share
Download
GRASS VALLEY FGAEY 1312 User Manual Download Page 57

MV-801 User Manual

Issue 1 Revision 1 

Page 37 

5.

Rear Slot (4)

: (Sirius 840 routers only) 

Fit a third 1312 Rear Panel module or a blanking plate to rear Slot (4). 

Fasten the two plate-securing screws. Gently tighten the fixing screws. Do not 
over-tighten them.

Rear modules are now installed. 

Now go to the 

front 

of the router:

ant fan door (refer to Figure 14).

6.

Front Slot (1)

: Insert a 5902 Multiviewer Crosspoint Module into the empty slot. 

If the slot is already occupied, it should only be occupied with a 5902 Multiviewer 
Crosspoint Module. 

If the slot is occupied with another type of module, then contact Grass Valley Support 
for advice.

7.

Front Slot (2)

: Fit a FGAMV MV-801 front main module to front Slot (2).

Be careful not to knock the high components on the top- and under-side of the 
module.

8.

Front Slot (3)

: Fit a second FGAMV MV-801 Main Module to front Slot (3) or leave 

empty.

9.

Front Slot (4)

: Fit a third FGAMV MV-801 Main Module (Sirius 840 only) to front Slot (4) 

or leave empty.

10. Close and secure the front fan door assembly, making sure not to trap any wires.

11. Close and lock the router front door.

The MV-801 Integrated Multiviewer hardware is now installed in the router frame.

Figure 21 Rear Blanking Panel - for empty rear slots

Figure 22 Inserting a Front Module with Levers

Insert

Summary of Contents for FGAEY 1312








































































Reviews:

No comments