GRASS VALLEY CR6400 Family, User Manual

Page: 76 / 110

66
CRSC Network Operation
Performing Takes
You can continue to break sources away, ad infinitum.
To clear the breakaway, select all levels and then press a source.
Example — Breakaway for CP6401 in Enhanced Mode with Hold
You want to take SD from source 1 to the default destination. But you also want to take AES12
from source 3 and both AES34 and AES56 from source 4. The previous source was source 7.
The levels defined for the destination are SD, A12, A34, and A56. SD was defined first in the
destination description. Therefore it is considered the
primary level.
This example shows a CP3201:
1 Select just level SD. Press source S1 .
Source S1 goes high tally because you have taken SD — the primary level — from this source.
Source S7 is red indicates that the other levels still come from source S7 . (The SD level button
is amber because SD is the primary level. The other level buttons are red because they are
not primary. They are low-tally because this is hold mode and SD remains the selection.)
2 Select just A12. Press source S3 .
Source 3 goes high-tally red because it is not the primary source. The level buttons remain
unchanged. You could choose another source at this point.
3 Select just A34 and A56. Press source S4 .
Source S4 goes high-tally red because, like source S3, it is not the primary source. The level
buttons remain unchanged. Again, you could choose another source at this point. Pressing
another source button without selecting another level simply changes the source for that
selected level (or levels).
To clear the breakaway, select all levels for the default destination and then press a source.
49 50 51 52 53 54
55
64
33 34 35 36 37 38 39 48
17 18 19 20 21 22 23 32
1 2 3 4 5 6 7
16
A56 A34 A12 SD
S3 S1 S4 S7
49 50 51 52 53 54
55
64
33 34 35 36 37 38 39 48
17 18 19 20 21 22 23 32
1 2 3 4 5 6 7 16
A56 A34 A12 SD
S3 S1 S4 S7
49 50 51 52 53 54
55
64
33 34 35 36 37 38 39 48
17 18 19 20 21 22 23 32
1 2 3 4 5 6 7
16
A56 A34 A12 SD
S3 S1 S4 S7