GRASS VALLEY CR6400 Family, User Manual

Page: 71 / 110

61
CR6400
User’s Guide
Example — Breakaway in Standard Mode
You want to take SD video from source S1 to destination D2 . But you also want to take AES12
from source S3 and both AES34 and AES56 from source S4 .
(Assume that these sources and destinations are enabled and remain enabled.)
The level buttons are SD, A12, A34, and A56.
1 Switch to the page containing destination D . Press destination D2 . The previous source was
source S7 so it is high-tally.
2 Select level SD (only). Press source 1.
3 Select level A12 only. Press source S3 .
4 Select levels A34 and A56 only. Press source S4 .
Double-press any of the level buttons to make visible the source that contributes that level. (You
might have to switch pages to see the source.
You can continue to break sources away, ad infinitum, and you can come back to the destination
later and it will still show the breakaway. You could add or remove breakaway sources at that
time too.
49 50 51 52 53 54
55
64
33 34 35 36 37 38 39 48
17 18 19 20 21 22 23 32
1 2 3 4 5 6 7
16
A56 A34 A12 SD D2
P2 P1
S7 S4 S3 S1
49 50 51 52 53 54
55
64
33 34 35 36 37 38 39 48
17 18 19 20 21 22 23 32
1 2 3 4 5 6 7
16
A56 A34 A12 SD D2
P2 P1 S7
S4
S3 S1
49 50 51 52 53 54
55
64
33 34 35 36 37 38 39 48
17 18 19 20 21 22 23 32
1 2 3 4 5 6 7
16
A56 A34 A12 SD D2
P2 P1
S7 S4 S3 S1
49 50 51 52 53 54
55
64
33 34 35 36 37 38 39 48
17 18 19 20 21 22 23 32
1 2 3 4 5 6 7
16
A56 A34 A12 SD D2
P2 P1 S7 S4 S3 S1