GRASS VALLEY CameraMan CPT-2018, Installation And Operation Manual

Page: 87 / 102

CameraMan Installation and Operation Manual 87
User Mode Submenus Overview
Detail Settings
Figure 61. Detail Settings Submenus
Table 34. Detail Settings
Detail (OFF, Low, High) Contour correction quantity can be selected. Detail settings made using the Hori-
zontal/Vertical Detail Level High/Low setting.
Detail level can be set in horizontal (H) and vertical (V) directions with the Detail setting at High or
Low.
Whichever the direction, H or V, the set level at High must be at least one position higher than that
at Low.
H Detail Level H (L+1 to +63)
V Detail Level H (L+1 to +31)
H Detail Level L (0 to H-1)
V Detail Level L (0 to H-1)
Detail Band (1 to 5) A contour correction band can be set with the Detail setting at High or Low. The higher set-
ting, the finer will be the detail.
Noise Suppress (1 to 10) Screen noise can be reduced with the Detail setting at High or Low. If the noise suppress
compensation level is set too high, a fine object will be reproduced less sharply.
Level Dependent (0% to 25%) Screen noise due to the detail of dark parts of an object can be reduced. If the Level
Dependenct setting is set too high, however, hair, for example, will be reproduced less sharply.
Dark Detail (0 to 5) The contours of the darker portions of an object can be emphasized. This setting is possi-
ble only when the Level Dependent setting is set to 0%.
Chroma Detail (0 to 15) The contours of high-hue portions of an object can be emphasized.
Flesh Noise Sup. (OFF, Low, High) Flesh noise is suppressed in two steps when the Detail setting is at High or Low.
Precision Detail (OFF, Low, High) This setting is to narrow detail width and suppress detail glare.