GRASS VALLEY CameraMan CPT-2018, Installation And Operation Manual

Page: 31 / 102

CameraMan Installation and Operation Manual 31
Appendix
C
Camera Specifications
This device complies with part 15 of the FCC rules. Operation is subject to
the condition that this device does not cause harmful interference. FCC
identifier: JFECM003-AA
Note In the following specifications the CPT 2018-A3D is shown without brackets
and the CPT 2018 A3DP is shown in brackets.
Image Elements 1/2” IT type 3-CCD
Pixels Total Elements: Approx. 410,000 [470,000]
Effective Elements: Approx. 380,000 [440,000]
Imaging Area 6.4 H x 4.8 V (equivalent to 1/2”)
Scanning System 2:1 interlaced NTSC system
[2:1 interlaced PAL system]
Scanning Frequency Horizontal = 15.734kHz [15.625kHz]
Vertical = 59.94Hz [50Hz]
Lens Mount 1/2” Bayonet Mount
Synchronize System Internal/external synchronization
Standard Illumination 2000 Ix, F14
Minimum Illumination 0.005 Ix (F1.4) 0.00005 Ix (F1.4) (2 sec. CCD
accumulation)
Signal-to-Noise Ratio 67 dB (DNR on) [65 dB (DNR on)]
Horizontal Resolution 850 lines
Registration 0.05%
Image Enhancer Horizontal/vertical
White Balance A/B 2 memory AWC, ATW
Black Balance Self-adjusting
Color Bar SMPTE color bar (setup 0/7.5 IRE)
[EBU color bar]
Shutter Speed OFF, 1/100 [1/120], 1/250, 1/500, 1/1000, 1/2000,
1/4000, 1/10000 Synchro-scan ELC
Gain Manual: max. 72dB (0~30 dB in steps, Night Eye/H,
Digital Gain 0~30 dB in 6 dB steps)
Auto: max. 42dB (AGC 0~30 dB, Night Eye/H)
Iris Auto (Manual by RCU control)
Video Output Composite: 1 Vp-p/75 ohm (BNC, 50P connector)
YC: Y 1Vp-p, C 0.286Vp-p [0.3Vp-p] (50P connector)
Component: Y 1.0Vp-p, Pr/Pb 0.7Vp-p, RGB 0.7Vp-p/
75 ohm (50P connector)
Operating
Temperature
14
o
F~113
o
F (-10
o
C~+45
o
C)