GRAPHTEC SignJet JS310-25ES Service Manual Download Page 36 | Manualshive

Page: 36 / 141

GRAPHTEC SignJet JS310-25ES Service Manual Download Page 36

5. Assembling the Printer and the Installation Procedure

29

JS310-UM-251-9370

Align the direction of the wheels with the
rectangular holes before raising the printer.

CAUTION:

The printer weighs approximately 270 kg (JS310-18ES) or 330 kg (JS310-25ES). There is a risk of lower

back injury to the person(s) attempting to lift the printer. Use a forklift to move the printer.

CAUTION:

When raising the printer off the base used to hold it in place, make sure that the printer’s weight is

evenly balanced.

(5) Move the printer.
Unlock the casters, and then move the printer to its installation location.
If the installation location is on a different level or if there is a steep slope leading up to it, use a forklift or

crane to move the printer.

CAUTION:

The printer weighs approximately 270 kg (JS310-18ES) or 330 kg (JS310-25ES). There is a risk of lower

back injury to the person(s) attempting to lift the printer. Use a forklift or crane to move the printer if
the installation location is on a different level or if there is a steep slope leading up to it.

(6) Lock the casters.

Lock the casters

«
...
34
35
36
37
38
...
»

Summary of Contents for SignJet JS310-25ES














































































































































Reviews:

No comments