GRAPHTEC SignJet JS310-25ES, Service Manual, Page: 29 / 141

4. Basic Panel Operation
22 JS310-UM-251-9370
4.3.3 System warning and error display
1. Warning:
Warn1: UV lamp is NOT ready;
Warn2: Press pole is NOT pulled down;
Warn3: The system is executing ink refilling;
2 Error:
When one of the errors listed below occurs during printing, the printer will run normally but give alarm
for warning.
Err5: Ink refill overtime;
Err6: The safety bottle is full;
Err7: For solvent based printer: The waste ink bottle is full;
For UV printer: The safety bottle in manometer is full;
Err8: Null
Errors listed below indicate the detail for further check when self test fails
Err9: Y raster count direction differs from motion direction;
Err10: Y raster signal is NOT detected;
Err11: Y raster error too big;
Err12: Reverse count abnormal;
Err13: Self test for main board failed;
Err14: Version of assistant board NOT matches main board;