background image

• To ensure your safety make sure that 
your stove’s installation complies with 
all local building regulations’ ventilation 
requirements. Low energy houses have 
their own particular requirements and 
these should be strictly adhered to.
• Do not use flammable liquids to ignite 
the fire. In the confined space of the 
firechamber there is a real potential to 
cause a life-threatening flash flame or 
explosion.
• Never over-fire the stove. If any  
external parts of your stove glow red 
during operation then immediate action 
should be taken to reduce the supply  
of air to the firechamber through the 
Primary and Secondary air controls 
which should quickly limit the intensity 
of the fire.
• This stove is CE approved and tested 
to EU EN13240 standards in the United 
Kingdom by Kiwa GasTec (

www.kiwa.

co.uk

). Alterations to its construction 

could be potentially dangerous and will 
also render your product warranty void.
• Do not use aerosol products in the 
vicinity of the stove when it is in use.
• Check and clean the stove’s flue way 
and the top of baffle plate regularly 
to help avoid potential blockages (

see 

pages 9, 33 and 34)

.

• Clean your chimney regularly (

see 

page 34)

.

For more information on stove 
safety please visit  
www.stovesafetyfirst.com

8

IMPORTANT SAFETY ADVICE

• Ensure that an approved carbon  
monoxide detector (BS EN50291:2001) 
is fitted in the same room as the stove. 
It should be powered by a battery  
designed for the working life of the 
alarm. 

Please note

 that since October 

2010 this is now a requirement under 
UK Building Regulations.
• External surfaces including the fire-
chamber door and operating handles, 
windows, flue pipes and stove  
bodywork will become extremely hot. 
Always use the tool provided and avoid  
touching these parts of the stove 
without proper protection, such as heat 
resistant gloves or other protective aids. 
• Potentially combustible material or 
objects such as soft furnishings should 
never be left on or near any of the 
stove’s hot surfaces. Ensure that wood 
supplies and log baskets are kept at a 
safe distance from the stove.
• Never leave children unattended in  
the room where your stove is being  
operated. Ensure that children are 
aware of the potential danger and 
make sure that they keep clear of the 
stove when it is in operation. Where 
children, the elderly or the infirm are 
present always use an approved safety 
fireguard (BS6539) to prevent  
accidental contact with the stove. 
• This stove should 

not

 be fitted in a 

room with an extractor fan (eg kitchen) 
as this will adversely affect the air  
quality in the room and could be  
dangerous for the room’s occupants. It 
will also starve the stove of combustion  
air and reduce the stove’s efficiency.

Summary of Contents for GR905









































Reviews: