Graphite 58G145, Instruction Manual

Page: 15 / 104

15
Long-lasting drilling with low torque of the spindle may overheat the motor. Periodical breaks
in operation must be taken or allow the tool to operate with maximum speed without load for
approximately 3 minutes.
OPERATION AND MAINTENANCE
CLEANING AND MAINTENANCE
• It is recommended to clean the tool after each use.
• Do not use any cleaning agents, as they may damage parts of the tool made of plastic.
• Clean the casing with dry cloth.
• The tool should always be stored in a dry place and out of reach of children.
All types of faults and defects should be eliminated by an authorised service of the manufacturer.
SPECIFICATIONS
RATED DATA
Cordless screwdriver
Parameter Value
Battery voltage 4,8 V DC
Battery type Ni-Cd
Battery capacity 800 mAh
Idle speed: 220 min -1
Tool chuck: ¼” (6,35mm)
Max. torque 5 Nm
Protection class III
Weight (without charger) 0,41kg
Year of manufacture 2016
Charger
Parameter Value
Power supply voltage 230 V AC
Power supply frequency 50 Hz
Charging voltage 4,8 V DC
Max. charging current 450mA
Charging time 3÷5 h
Protection class II
Weight 0,15kg
Year of manufacturer 2016
NOISE AND VIBRATION DATA
Acoustic pressure level: Lp
A
= 57 dB(A) K = 3 dB(A)
Acoustic power level: Lw
A
= 68 dB(A) K = 3 dB(A)
Vibration acceleration value a
h
< 2,5 m/s
2
K = 1.5 m/s
2