Graphite 58G060, Instruction Manual

Page: 10 / 88

10
TRANSLATION OF THE ORIGINAL INSTRUCTIONS
BLADE SAWING MACHINE (JIGSAW)
58G060
CAUTION: BEFORE USING THE POWER TOOL READ THIS MANUAL CAREFULLY AND KEEP IT FOR FUTURE
REFERENCE.
DETAILED SAFETY REGULATIONS
Use dust-masks when cutting to protect your respiratory system against dust that appears. ●
Check the processed material thoroughly before cutting to eliminate possibility of cutting nails, bolts, or other ●
hard objects.
Do not cut pipes with the jigsaw.
●
Do not cut objects thicker than allowed in technical specification for a given material. ●
Prior to operation ensure there is enough space under processed material to avoid table or floor damage ●
with the blade.
Hold the jigsaw in a closed hand.
●
Before pressing the switch ensure the jigsaw does not have contact with the material . ●
Do not touch moving parts. ●
Before cutting floor, wall or other material ensure it does not contain conductors. ●
Do not put away the jigsaw until it stops moving. Do not switch the jigsaw on when not holding it. ●
To remove the blade switch the jigsaw off with the switch and wait until the blade stops moving. Then ●
disconnect the tool from mains socket.
Do not touch the blade or processed material immediately after finishing the work. Those elements may
●
be hot and may cause burns.
When you see unusual behaviour of the tool or hear strange noises, immediately switch off the tool and
●
remove the plug from mains socket.
To ensure proper cooling keep ventilation holes in the jigsaw body unobstructed.
●
CAUTION! This device is designed to operate indoors.
The design is assumed to be safe, protection measures and additional safety systems are used,
nevertheless there is always a small risk of operational injuries.
CONSTRUCTION AND USE
Jigsaw is a hand-operated power tool with insulation class II. It is driven by a single-phase commutator
motor. This type of power tools is widely used for cutting wood, wood-like materials, plastics and metals.
Range of use covers repair and building works, and any work from the range of individual, amateur activi-
ties (tinkering).
Use the power tool according to the manufacturer’s instructions only.
DESCRIPTION OF DRAWING PAGES
Below enumeration refers to the device elements depicted on the drawing pages of this manual.
Wheel for operation speed control 1.
Switch button 2.
Switch lock button 3.
Dust outlet 4.
Footplate 5.
Wheel for pendulum action setting 6.
* Differences may appear between the product and drawing