Graphcore IPU-POD128, Build And Test Manual, Page: 18 / 113

IPU-POD128 build and test guide
3.4.4 Removing the vertical accessory channels
Using a Torx TX30 screwdriver, remove two accessory channels from the rack ( Fig. 3.6 ).
Fig. 3.6: Accessory channel removal
3.4.5 Adjusting the rear accessory channels
Set the rear accessory channel to the furthest position in the rack. Tighten up the screws ensuring the teeth
engage into the slots in the rail, as shown in Fig. 3.7 .
Fig. 3.7: Rear accessory channel (ensure teeth engage in slots)
Version: latest (2021-11-25) 14