HandTone-496 User Manual
Grandstream Networks, Inc.
14
6
Configuration Guide
6.1
Configuring HandTone-496 WAN IP through Voice Prompt
6.1.1
DHCP Mode
Follow section 5.1 with voice menu option 01 to enable HandTone-496 to use DHCP.
6.1.2
STATIC IP Mode
Follow section 5.1 with voice menu option 01 to enable HandTone-496 to use STATIC IP mode, then
use option 02, 03, 04 to set up HandTone-496’s IP, Subnet Mask, Gateway respectively.
6.2
Configuring HandTone-496 with Web Browser
HandTone-496 series ATA has an embedded Web server that will respond to HTTP GET/POST
requests. It also has embedded HTML pages that allow users to configure the HandTone-496 through a
Web browser such as Microsoft’s IE and AOL’s Netscape.
6.2.1
Access the Web Configuration Menu
The HandTone-496 HTML configuration menu can be accessed via LAN or WAN port:
•
From the LAN port use the default LAN gateway IP address:
http://192.168.2.1
•
The WAN port HTML configuration option is disabled by default from factory. To access the
HTML configuration menu from the WAN port, first enable the “WAN side HTTP access”
option by accessing the configuration via LAN port. With the WAN side HTTP access enabled,
then get the WAN IP address of the HandTone-496 through section 5.1 with menu option 02.
The HandTone-496’s Web Configuration page can be accessed by the following URI via WAN
port:
http://HandyTone-IP-Address,
where the
HandyTone-IP-Address
is the WAN IP address of the HandTone-496.
6.2.2
End User Configuration
Once this HTTP request is entered and sent from a Web browser, the HandTone-496 will respond with
the following login screen:
