HandTone-496 User Manual
Grandstream Networks, Inc.
27
6.2.4
Saving the Configuration Changes
Once a change is made, users should click on the “Update” button in the Configuration page. The
HandTone-496 will then display the following screen to confirm that the changes have been saved.
Grandstream Device Configuration
STATUS
BASIC SETTINGS ADVANCED SETTINGS
Your configuration changes have been saved.
They will take effect on next reboot.
All Rights Reserved Grandstream Networks, Inc. 2004
Users are recommended to power cycle the HandTone-496 after seeing the above message.
6.2.5
Rebooting the HandTone-496 from Remote
The administrator of the HandTone-496 can remotely reboot the HandyTone ATA by clicking on the
“Reboot” button at the bottom of the configuration page. Once done, the following screen will be
displayed to indicate that rebooting is underway.
Grandstream Device Configuration
The device is rebooting now...
You may relogin by clicking on the link below in 30 seconds.
Click to relogin
All Rights Reserved Grandstream Networks, Inc. 2004
At this point, the user can relogin to the HandTone-496 after waiting for about 30 seconds.
