Firmware Version 1.0.1.54
GXV3240D Administration Guide
Page 57 of 83
MAINTENANCE PAGE DEFINATION
MAINTENANCE/NETWORK SETTINGS
Address Type
Allows users to configure the appropriate network settings on the
phone. Users could select "DHCP", "Static IP" or "PPPoE". By default,
it is set to "DHCP".
DHCP Host name (Option 12)
Specifies the name of the client. This field is optional but may be
required by some Internet Service Providers.
DHCP Vendor Class ID
(Option 60)
Used by clients and servers to exchange vendor class ID. The default
setting is GXV.
IP Address
Enter the IP address when static IP is used.
Subnet Mask
Enter the Subnet Mask when static IP is used.
Default Gateway
Enter the Default Gateway when static IP is used.
DNS Server 1
Enter the DNS Server 1 address when static IP is used.
DNS Server 2
Enter the DNS Server 2 address when static IP is used.
PPPoE Account ID
Enter the PPPoE account ID.
PPPoE Password
Enter the PPPoE Password.
Alternate DNS Server
Enter the alternate DNS server address.
Second Alternate DNS Server
Enter the second alternate DNS server address.
Enable LLDP
Enable/Disable LLDP on the phone. The default setting is "Yes".
Layer 3 QoS for SIP
Defines the Layer 3 QoS parameter for SIP packets. This value is
used for IP Precedence, Diff-Serv or MPLS. The default setting is 48.
Layer 3 QoS for Audio
Defines the Layer 3 QoS parameter for audio packets. This value is
used for IP Precedence, Diff-Serv or MPLS. The default setting is 48.
Layer 3 QoS for Video
Defines the Layer 3 QoS parameter for video packets. This value is
used for IP Precedence, Diff-Serv or MPLS. The default setting is 48.
Layer 2 QoS 802.1Q/VLAN
Tag
Assigns the VLAN Tag of the Layer 2 QoS packets for LAN port. The
default value is 0.
Layer 2 QoS 802.1p Priority
Value
Assigns the priority value of the Layer2 QoS packets for LAN port.
The Default value is 0.
PC Port VLAN Tag
Assigns the VLAN Tag of the Layer 2 QoS packets for PC port. This
tags the VLAN tag value on the target address received from the LAN
port of the phone then sends the value to the device connected to the
PC port.
Note:
VLAN tag value on the device connected to the PC port should be the