Grandstream Networks GXP2130 Series Administration Manual Download

Page: 37 / 89

GXP2130/GXP2140/GXP2160
FIRMWARE VERSION 1.0.5.18

GXP2130/GXP2140/GXP2160
ADMINISTRATION GUIDE

Page 35 of 87

setting is “Disabled”.

Conference URI

Configures Conference URI for N-way conference (Broadsoft Standard).

Music On Hold URI

Configures Music On Hold URI to call when a call is on hold. This feature has

to be supported on the server side.

Force BLF Call-pickup by

prefix

Configures to always use the prefix for BLF Call-pickup. The default setting is
“No”.

BLF Call-pickup Prefix

Configures the prefix prepended to the BLF extension when the phone picks

up a call with BLF key. The default setting is **.

PUBLISH for Presence

Enables presence feature on the phone. The default setting is "No".

Omit charset=UTF-8 in

MESSAGE

Omit charset=UTF-8 in MESSAGE content-type

Special Feature

Different soft switch vendors have special requirements. Therefore users may

need select special features to meet these requirements. Users can choose

from Standard, Nortel MCS, Broadsoft, CBCOM, RNK, Sylantro, Huawei IMS

and PhonePower depending on the server type. The default setting is

"Standard".

Broadsoft Call Center

Default setting is "No". When set to "Yes",

a soft key “BSCCenter” is displayed

on LCD. User can access different Broadsoft Call Center agent features via
this softkey. Please note that “Feature Key Synchronization” will be enabled

regardless of this setting.

Hoteling Event

Broadsoft Hoteling event feature. Default setting is "No". With “Hoteling Event”

enabled, user can access the Hoteling feature option by pressing the
“BSCCenter” sof tkey.

Call Center Status

When set to "Yes", the phone will send SUBSCRIBE to the server to obtain call

center status. The default setting is "No".

Broadsoft Executive

Assistant

When enabled, Feature Key Synchronization will be enabled regardless of

web settings.

Feature Key

Synchronization

This feature is used for Broadsoft call feature synchronization. When it's

enabled, DND, Call Forward features and Call Center Agent status can be

synchronized between Broadsoft server and phone. The default setting is

"Disabled".

Broadsoft Call Park

When enabled, it will send SUBSCRIBE to Broadsoft server to obtain Call Park
notifications. The default setting is “Disabled”.

Account x



SIP Settings



Session Timer

Session Expiration

The SIP Session Timer extension (in seconds) that enables SIP sessions to be

periodically "refreshed" via a SIP request (UPDATE, or re-INVITE). If there is

no refresh via an UPDATE or re-INVITE message, the session will be

Summary of Contents for GXP2130 Series


























































































Search results

Summary of Contents for GXP2130 Series

Reviews:

Related manuals for GXP2130 Series

Brands by name

Popular brands

Grandstream Networks GXP2130 Series, Administration Manual

Search results

Summary of Contents for GXP2130 Series

Reviews:

Related manuals for GXP2130 Series

Brands by name

Popular brands