Grandstream Networks GXP2130 Series Administration Manual Download

Page: 10 / 89

GXP2130/GXP2140/GXP2160
FIRMWARE VERSION 1.0.5.18

GXP2130/GXP2140/GXP2160
ADMINISTRATION GUIDE

Page 8 of 87

[SETTINGS PAGE DEFINITIONS]



Added function to allow configuration of Call Log for other extension. [SETTINGS PAGE

DEFINITIONS]



Added MPK mode Monitored Call Park for other extension. [SETTINGS PAGE DEFINITIONS]



Added function to allow user to upload certificate file to phone and to configure the CA certificate.

[

MAINTENANCE PAGE DEFINITIONS]

FIRMWARE VERSION 1.0.4.23



Added support to display the status of NAT connection for each account on the phone.



Added option to auto provision Eventlist BLFs with monitored extensions. [ACCOUNTS PAGE

DEFINITIONS]



Added crypto life time option for SRTP calls. [ACCOUNTS PAGE DEFINITIONS]



Added option to set the NTP update interval time. [SETTINGS PAGE DEFINITIONS]



Changed the default value of Layer 3 QoS for SIP to 26. [NETWORK PAGE DEFINITIONS]



Added option to set the Layer 3 QoS for RTP. [NETWORK PAGE DEFINITIONS]



Added BroadSoft Phonebook option in Phonebook Key functions list. [PHONEBOOK PAGE

DEFINITIONS]



Added LDAP Protocol option to support LDAP over TLS. [PHONEBOOK PAGE DEFINITIONS]



GXP2130v1 does not support Bluetooth function, GXP2130v2 supports Bluetooth. [BLUETOOTH]

FIRMWARE VERSION 1.0.4.16



Added support to configure phone’s MPK from phone GUI. [SETTINGS PAGE DEFINITIONS]

FIRMWARE VERSION 1.0.4.15



Added option to configure to always use the prefix for BLF Call-pickup. [ACCOUNTS PAGE

DEFINITIONS]



Added option to send SUBSCRIBE to BroadSoft server to obtain Call Park Notifications. [ACCOUNTS

PAGE DEFINITIONS]



Added option to send credentials before being challenged by the server. [MAINTENANCE PAGE

DEFINITIONS]



Added user name and password options for HTTP/HTTPS server authentication for phonebook XML

downloading. [PHONEBOOK PAGE DEFINITIONS]



Added option to enable/disable the dial plan check while dialing through the call history and any

phonebook directories. [SETTINGS PAGE DEFINITIONS]

Summary of Contents for GXP2130 Series


























































































Search results

Summary of Contents for GXP2130 Series

Reviews:

Related manuals for GXP2130 Series

Brands by name

Popular brands

Grandstream Networks GXP2130 Series, Administration Manual

Search results

Summary of Contents for GXP2130 Series

Reviews:

Related manuals for GXP2130 Series

Brands by name

Popular brands