Grandstream Networks GXP2130 Series Administration Manual Download

Page: 77 / 89

GXP2130/GXP2140/GXP2160
FIRMWARE VERSION 1.0.5.18

GXP2130/GXP2140/GXP2160
ADMINISTRATION GUIDE

Page 75 of 87

PACKET CAPTURE

GXP2130/GXP2140/GXP2160 is embedded with packet capture function on firmware 1.0.4.10 or greater.

The related options are under

Maintenance -> Packet Capture

Figure 7: Packet Capture in Idle

In the option

Capture Location

, User can select to store the capture file in phone’s internal storage or

extended USB storage. When the Capture Location is specified as USB, a USB drive must be connected.

When USB is selected as the capture location, user can define the capture file name in

USB Filename

field. User can also define whether RTP packets will be captured or not from

With RTP Packets

option.

Note: Only GXP2140/GXP2160 supports USB connection.

Figure 8: Capture to USB Drive

Summary of Contents for GXP2130 Series


























































































Search results

Summary of Contents for GXP2130 Series

Reviews:

Related manuals for GXP2130 Series

Brands by name

Popular brands

Grandstream Networks GXP2130 Series, Administration Manual

Search results

Summary of Contents for GXP2130 Series

Reviews:

Related manuals for GXP2130 Series

Brands by name

Popular brands