FIRMWARE VERSION 1.0.5.2 GXP1160/GXP1165 USER MANUAL
Page 50 of 59
features on the phone.
Do Not Escape # as %23 in
SIP URI
Specifies whether to replace # by %23 or not for some special situations.
The default setting is "No".
Disable Telnet
Disables Telnet access. The default setting is "No".
PC Port Mode
Configures the PC port mode. The default setting is "Enabled". When set
to "Disabled", the PC port is turned off. When set to "Mirrored", the traffic
in the LAN port will go through PC port as well so users could capture
phone's trace by connecting a PC to the phone's PC port.
Display Language
Selects display language on the phone.
Download Device
Configuration
Click to download the device configuration file in .txt format.
NAT
SETTINGS
If the devices are kept within a private network behind a firewall, we recommend using STUN Server. The
following settings are useful in the STUN Server scenario:
STUN Server
(under Advanced Settings page)
Enter a STUN Server IP (or FQDN) that you may have, or look up a free public STUN Server on the
internet and enter it on this field. If using Public IP, keep this field blank.
Use Random Ports
(under Advanced Settings page)
This setting depends on your network settings. When set to "Yes", it will force random generation of
both the local SIP and RTP ports. This is usually necessary when multiple GXPs are behind the
same NAT. If using a Public IP address, set this parameter to "No".
NAT Traversal
(under Account Setting page)
Default setting is "No". Enable the device to use NAT traversal when it is behind firewall on a private
network. Select Keep-Alive, Auto, STUN (with STUN server path configured too) or other option
according to the network setting.
PUBLIC
MODE
The GXP1160/GXP1165 supports hot desking using public mode. Under public mode, users could login
the phone with the SIP account User ID and password. Please follow the steps below to configure the
phone for public mode:
