Firmware version 1.0.0.19 GXE5102/5104/5108/5116 USER MANUAL
Page 39 of 52
SIP SETTINGS/SIP MISCELLANEOUS
Register
Register as a SIP user agent to a SIP proxy (provider).
Register Timeout
The interval (in seconds) for the GXE to retry registration. The default
setting is 20.
Register Attempts
Number of registration attempts before the GXE gives up. The default
setting is 0 (keep trying until the server side accepts the registration
request).
Video Max Bitrate (kb/s)
Maximum bitrate (kb/s) for video calls. The default setting is 384.
Support for SIP Video
Enables/disables SIP video support.
Generate Manager Events
Generates manager events when SIP UA performs events (e.g. hold).
Reject NonMatching Invites
When rejecting an incoming INVITE or REGISTER request, always
reject with "401 Unauthorized" instead of notifying the requester that if
there is a matching user or peer for the request.
NonStandard G.726 Support
If the peer negotiates G726-32 audio, use AAL2 packing order instead of
RFC3551 packing order (this is required for Sipura and Grandstream
ATAs).
SIP SETTINGS/SIP SESSTION TIMER
Session Timers
•
Originate: always request and run session-timers.
•
Accept: Run session-timers only when requested by other UA.
•
Refuse: Do not run session timers.
The default setting is "Accept".
Session Expires
The maximum session refresh interval (in seconds). The default setting
is 1800.
Min SE
The minimum session refresh interval (in seconds). The default setting is
90.
Session Refresher
Selects the session refresher to be UAC or UAS. The default setting is
UAC.
SIP SETTINGS/SIP TLS AND TCP SETTINGS
TCP Enable
Enables/disables server for incoming TCP connections. The default
setting is "No".
TCP Bindaddr
IP address for TCP server to bind to (0.0.0.0: binds to all interfaces). The
default port number is 5060 if not specified.
TLS Enable
Enables/disables server for incoming TLS (secure) connections. The