Firmware version 1.0.0.19 GXE5102/5104/5108/5116 USER MANUAL
Page 34 of 52
INTERNAL OPTIONS/FAX T.38
In this page, users could create and configure FAX extensions on the GXE.
Figure 27: FAX Settings
INTERNAL OPTIONS/RTP SETTINGS
RTP Start
RTP port starting address. The default setting is 10000.
RTP End
RTP port ending address. The default setting is 20000.
Strict RTP
Enables/disables strict RTP protection. When enabled, RTP packets
that do not come from the source of the RTP stream will be dropped.
The default setting is "Disable".
RTP Checksums
Enables/Disables RTP Checksums. The default setting is "Disable".
INTERNAL OPTIONS/HARDWARE CONFIG
In this page, users could configure the signaling preference for each FXS and FXO ports, as well as region
preference for Tone and Opermode. Other advanced settings such as PCMA Override, FXS Honor Mode,
Boost Ringer, Fast Ringer, Low Power, Ring Detect, MWI Mode and etc can also be configured here as the
figure shown below.
