Firmware version 1.0.0.19 GXE5102/5104/5108/5116 USER MANUAL
Page 37 of 52
Jitter Shrink Rate
Configures the jitter shrink rate.
INTERNAL OPTIONS/IAX REGISTRATION
Min Reg Expire
Minimum duration (in seconds) of registrations/subscriptions. The
default setting is 60.
Max Reg Expire
Maximum duration (in seconds) of incoming registration/subscriptions.
The default setting is 3600.
IAX Thread Count
Configures number of IAX threads.
IAX Max Thread Count
Configures maximum number of IAX threads.
Auto Kill
When set to "yes", the connection will be terminated if ACK for the NEW
message is not received in 2000ms. Users could also specify number (in
milliseconds) in addition to "yes" and "no".
Authentication Debugging
Enables/disables IAX related debug output in log messages.
Codec Priority
Configures codec negotiation priority to Caller, Host, Disabled or
Reqonly.
Type of Service
Configures ToS bit for preferred IP routing.
Trunk Frequency
Configures frequency of trunk frames measured in milliseconds.
Trunk Time Stamps
Enables/disables attaching time stamps to trunk frames.
INTERNAL OPTIONS/IAX SECURITY
Call Token Optional
A single IP address or a range of IP addresses for which call token
validation is not required in the form 11.11.11.11
or
11.11.11.11/22.22.22.22.
Max Call Numbers
Limits the amount of call numbers allowed for a single IP address.
Max Nonvalidated Call
Numbers
Limits the amount of nonvalidated call numbers for all IP addresses
combined.
Call Number Limits
Limits the call numbers for a given IP range.
SIP SETTINGS/GENERAL
Realm For Digest
Authentication
Realms MUST be globally unique according to RFC 3261. Configure this
value as your host or domain name. The default setting is \"asterisk\". If
a system name is configured in asterisk.conf, this value will be set to the
configured system name.
UDP Port to Bind to
The default setting is 5060.
