
22
Rotisserie Instructions
1.
Remove all components from the carton.
Slide a Holding Fork onto each end of the Rotisserie Spit. Adjust spacing between Holding Forks to
accommodate your food, then turn clockwise until the screw stops.
2.
Holding Forks
Spit
Clockwise to Tighten
Note: In order to avoid damaging the holding fork, do not
tighten unless it is assembled on the spit rod.
Pan Head Screw 3/16"x3/8"
Qty. 4
Part # S182G03062
3. Refer to Motor installation steps on page 8. Be sure the Motor attaches to the Motor transmission with the
electrical cord facing down.
Gear Shaft