15
8.3.2 PPPoE:
The Grand Wi-Fi/ IP Camera Plus can directly connect to the ADSL. It should be setup on the LAN
environment to setup the PPPoE information before connecting to the ADSL modem.
PPPoE:
Enable/ disable the PPPoE function.
User Name:
Enter the PPPoE account provided by the ISP
Password:
Enter the password provided by the ISP.
PPPoE Management:
If the ADSL modem and the camera are connected and after the
information of PPPoE are set, the current PPPoE status will be displayed.
NOTE: Click “Apply” to confirm your settings.
8.3.3 Dynamic DNS:
If you are using a DDNS connection, enable the DDNS function and enter
domain name, User Name and Password.
NOTE: Click “Apply” to confirm your settings.
16
8.3.4 FTP:
Upload the motion-detected images to FTP server.
Enable:
Enable/ disable the FTP function.
Server URL:
Enter the domain name or IP address of the FTP server.
User:
Enter the user name of the FTP server.
Password:
Enter the password of the FTP server.
Remote Path:
Enter the folder path to store the images on the FTP server.
Interval Sec:
Set the interval time to upload the image.
Enable file name:
If you select “Disable”, the latest image will replace the original image.
File name:
Set the file name of the image.
NOTE: Click “Apply” to confirm your settings.
8.3.5 E-Mail:
Capture and e-mail the image.
Enable:
Enable/ disable the E-mail function.
Mail Server:
Enter the domain name or IP address of the Mail server (POP3).
Sender’s Address:
Enter the e-mail address of the sender.
Recipient’s Address:
Enter the e-mail address of the recipient.
Subject:
Enter the subject of the mail.
User ID:
Enter the user name of the Mail server.
Password:
Enter the password of the Mail server
Interval In Minute:
Set the interval time to mail the image.
Motion send Mail:
Send the mail with image while sensing approaching subjects (refer to page
17 for set the motion detection sensitivity).
NOTE: Click “Apply” to confirm your settings.
