background image

Page 2

Fire Bowls and Inserts Premium Line

Automated Operation   

Table of Contents

Section 1.  Important Safety Instructions .......3
Section 2.  General Description  ......................4

2.1  Product Overview ..........................................................4

2.2  Product Contents...........................................................4

Section 3.  Installing the Grand Effects

®

  

Fire Bowls  ......................................5

3.1

 

Preparing the Fire Bowl for Installation .........................5

3.2

 

Gas and Electric Requirements.....................................7

3.3

 

Installing the Fire Bowl ..................................................8

 

Section 4.  Burner Setup and Adjustment ....15

4.1  Burner Setup ...............................................................15

4.2  Burner Adjustment .......................................................16

Section 5.  Maintenance .................................18
Section 6.  Operation ......................................19

6.1  Operating Instructions .................................................19

Section 7.  Troubleshooting ...........................20
Section 8.  Control Module Diagram .............22
Section 9.  Wiring Diagram ............................23

Summary of Contents for 100

























Reviews: