13
5.0 BURNER INSTALLATION AND SPECIFICATIONS
5.1 ASSEMBLY & INSTALLATION OF BURNER
ASSEMBLE
Check burner model is correct for furnace rating required. Assemble as
per burner manufacturer’s instructions.
SELECT NOZZLE
Select oil input, nozzle and burner configuration as shown on furnace
operating decal.
INSTALL NOZZLE
Install selected nozzle, check for clean seating and tighten in nozzle
adaptor.
ELECTRODES
See burner manufacturer’s instructions for correct setting.
INSERTION
See figure below.
LENGTH
.
PUMP BY-PASS
For one pipe system factory setting (no
PLUG
plug).
WIRING
Refer to wiring diagram for correct
burner connections (see page 25 or 26).
THERMOSTAT
Connect the thermostat wires to the fan
timer control board (ST9103).
