Grammer PRIMO XL Plus, Manual

Page: 26 / 85

Seat functions and operation
26
GB
Fore/aft adjustment
The fore/aft adjustment is released by lifting
the locking lever.
WARNING! Risk of accident!
Do not operate the locking lever
while driving.
WARNING! Risk of crushing!
Only touch the lever at the in-
dented grip, do not reach back un-
der the lever.
After the adjustment, the locking lever
must latch into the desired position with an
audible click. It should not be possible to
move the driver’s seat into another position
when it is locked.
Do not lift the locking lever with your leg
or calf.
Armrest adjustment *
The inclination of the armrests can be
modified by turning the adjustment knob.
When turning the knob to the outside ( + ) the
front part of the armrest will be lifted, when
turning the knob to inside (
- ) it will be lowered.
Armrests * ***
The armrests can be folded up if required and
the height individually adjusted.
To adjust the armrests for height, separate
the round cap (see arrow) from the cover,
loosen the hexagon nut (size 13 mm) behind
it and adjust the armrests to the desired posi-
tion (5-steps) and tighten the nut again
(
25Nm ). Replace the cap onto the nut.
* if fitted ** depending on model *** optional extra