EN - 40 -
If your freezer is not operating:
•
Are there any electrical faults?
•
Is the plug fully in the socket?
•
Is the plug fuse or the mains fuse blown?
• Is there any fault in the socket? Examine this by plugging your freezer into a socket
which you are sure that is working.
A rise in the temperature may be caused by;
•
Frequent door opening for long periods of time
•
Loading with large quantities of warm foods
•
High ambient temperature
•
An error with the appliances.
Check Warnings:
Warning codes are displayed in the freezer indicators if an incorrect temperature is detected
in the freezer or when a problem occurs in the appliance.
Also a warning sound is heard.
The problem code and audible alarm will continue until you press the SET or MODE button.
When you press one of these buttons, the audible alarm will stop immediately and the “LF”
warning will disappear in 15 minutes. You don’t have to call your service. This condition may
occur due to the reasons given above. You can keep storing your foods in your freezer. If
the “LF” warning does not disappear an hour after pressing the button, call your service and
do not re-freeze any thawed food. Thawed food must be eaten quickly.
If your freezer is operating too loudly:
Normal Noises
Cracking (Ice cracking) Noise:
•
During automatic defrosting.
• When the appliance is cooled or warmed (due to expansion of appliance material).
Short cracking:
Heard when the thermostat switches the compressor on/off.
E09
Freezer comp. Not
Cold enough
This caution will be
seen especially after
long term of power
failure
1. Do not freeze the foods
that are thaw and use in
short time period.
2. Set the freezer
temperature to colder values
or set the super freeze , until
the compartment gets to
normal temperature.
3. Do not put fresh food until
this failure is off.
4. Please don’t open the
refrigerator doors frequently
until the warning disappears.
5. If the warning continues,
please contact with
authorized technical service.
