In the
Ch 1/2 Menu
shown below, set the following parameters:
•
Ch 1/2 Mode
- set the operating modes for Channels 1 and 2.
Choose from
2-Channel
(Ch 1 and 2 will be independent),
Stereo
(Ch 1/2 will be a
stereo pair) or
Quad Tracking
(Ch 1-4 will track together). Note that if you have
set Ch 3/4 in the next menu to
Quad Tracking
or the
Quad On
function is
enabled on the
Quad Menu
, this selection will default to
Quad Tracking
.
•
Ch 1 Digital Ref
- sets the Digital Output Reference level to match the studio
reference for channel 1 (in
2-Channel
mode), Ch 1/2 if in
Stereo
mode or all four
channels together if in
Quad Tracking
mode.
•
Ch 1 Analog Ref
- sets the Analog Input Reference level from -10dBu to +8dBu (in
0.5dBu steps) for channel 1 only (in
2-Channel
mode), Ch 1/2 if in
Stereo
mode or
all four channels if in
Quad Tracking
mode.
•
Ch 2 Dig Ref
- When
Ch 1/2 Mode
is set to
2-Channel
, this will adjust Channel
2 Digital Output Reference level only. If
Ch 1/2 Mode
is set to
Stereo,
adjustment
will affect the stereo pair, or if set to
Quad Tracking
, adjustment will affect all
channels.
•
Ch 2 Analog Ref
- When
Ch 1/2 Mode
is set to
2-Channel
, this will adjust
Channel 2 Analog Input Reference level only. If
Ch 1/2 Mode
is set to
Stereo
,
adjustment will affect the stereo pair, or if set to
Quad Tracking
, adjustment will
affect all channels.
In this menu, the following indicators are available:
•
Sampling Frequency
- will indicate what frequency the module is locking to,
either
External Lock
or
48kHz
(internal).
•
Clip Domain
- will indicate where clipping will occur (in the analog or digital
domain).
•
Ref Level
- illuminates green when signal is reaching the Digital Output
Reference level chosen.
•
D Clip1/2
- Black indicates signal is below digital clipping; Red indicates digital
signal is clipping. A grayed out box indicates that digital clipping cannot occur and
analog clipping will not be indicated.
Model 6010 Four Channel 20-bit Audio ADC
6010-9
