The
Quad Menu
shown below has been provided to allow adjusting and monitoring all
four channels at the same time when in
Quad Tracking
mode. Set the parameters as
follows:
•
Channel Mode
- Click in the
Quad On
box to enable quad tracking simultane-
ously for all four channels. Note that
Quad Tracking
can also be enabled in any
of the previous
Channel
mode menus.
•
Digital Ref
- set all four channels for the digital output reference to match your
studio reference.
•
Analog Ref
- adjusts the Analog input reference level of all four channels to
-10dBu to +8dBu (in 0.5dBu steps).
NOTE:
Digital and Analog Ref settings above will only be active when
Quad On
is
checked.
The following indicators are available in the menu below:
•
Sampling Frequency -
will indicate what frequency the module is locking to,
either
External Lock
or
48kHz
(internal).
•
D Clip 1-4
- Black indicates signal is below digital clipping; Red indicates digital
signal is clipping. A grayed out box indicates that digital clipping cannot occur and
analog clipping will not be indicated.
•
Ref Lvl
- will illuminate green when each channel is reaching the digital output
reference level chosen.
•
Clip Domain
- will indicate where clipping will occur (Analog or Digital domain).
6010-11
Model 6010 Four Channel 20-bit Audio ADC
