Avenue PC Remote Configuration
The Avenue PC remote control menus for this module are illustrated and explained in this
section. Refer to the
6010 Parameter Table
shown earlier for a summary of available
parameters that can be set remotely through the menus illustrated. For more information
on using Avenue PC, refer to the Avenue PC Control Application Software data pack that
came with the option.
6010 Avenue PC Menus
The menus for the
6010 Audio ADC
in the Avenue PC application allow you to set the
parameters for four channels of audio on this module. You may choose from three
operating modes,
2-Channel
,
Stereo
or
Quad Tracking
.
You may set all four channels to
2-Channel
mode, where each of the four audio channels
will be independent of each other. Adjustments may be made to each channel individually
and will not affect the other channels. Menu selections are provided for each channel as
shown in the following section.
You may set the four channels to
Stereo
mode, where Channels 1 and 2 and Channels 3
and 4 are stereo pairs. Adjustments made in the menus to one channel in the pair will
change the other channel. Channel 1 and 2 can be set to be independent (
2-Channel
)
while Channel 3 and 4 can be set to be a stereo pair if desired (or vice versa).
All four channels can be set to
Quad Tracking
where all channels will track together. If
parameters are changed in one channel, the other channels will track the change.
Selecting
Quad Tracking
in any one of the menus will change all channels to quad
tracking mode. A
Quad Menu
has been provided to allow easier adjusting and monitoring
of all four channels together.
Model 6010 Four Channel 20-bit Audio ADC
6010-8
