Graf one2clean Installation Manual Download Page 23

Page: 23 / 28

. INS

TALLA

TION

THE

EXTERNAL

ABINET

)

Graf UK Ltd

INSTALLATION OF THE EXTERNAL CABINET (S)

. Fitting the one2clean

control unit

7 / 8

5.3 Fitting the GRAF empty pipe closure element made of PE foam material

Feed the hoses out of the empty pipe into the cor-

responding holes in the pipe closure element.

Push the hose through the thin topmost layer. The

punch residue remains attached to the hose ends.

Cut off the hose ends in order to remove the punch

residue.

Push the empty pipe closure element into the emp-

ty pipe so that it is securely closed off.

5.3

Fitting the GRAF empty pipe closure element made of PE foam material

. Fitting the one2clean

control unit

7 / 8

5.3 Fitting the GRAF empty pipe closure element made of PE foam material

Feed the hoses out of the empty pipe into the cor-

responding holes in the pipe closure element.

Push the hose through the thin topmost layer. The

punch residue remains attached to the hose ends.

Cut off the hose ends in order to remove the punch

residue.

Push the empty pipe closure element into the emp-

ty pipe so that it is securely closed off.

Feed the hoses out of the empty pipe into the

corresponding holes in the pipe closure element.

. Fitting the one2clean

control unit

7 / 8

5.3 Fitting the GRAF empty pipe closure element made of PE foam material

Feed the hoses out of the empty pipe into the cor-

responding holes in the pipe closure element.

Push the hose through the thin topmost layer. The

punch residue remains attached to the hose ends.

Cut off the hose ends in order to remove the punch

residue.

Push the empty pipe closure element into the emp-

ty pipe so that it is securely closed off.

Push the hose through the thin topmost layer. The punch

residue remains attached to the hose ends.

Cut off the hose ends in order to remove the punch

residue.

Push the empty pipe closure element into the empty

pipe so that it is securely closed off.

. Fitting the one2clean

control unit

7 / 8

5.3 Fitting the GRAF empty pipe closure element made of PE foam material

Feed the hoses out of the empty pipe into the cor-

responding holes in the pipe closure element.

Push the hose through the thin topmost layer. The

punch residue remains attached to the hose ends.

Cut off the hose ends in order to remove the punch

residue.

Push the empty pipe closure element into the emp-

ty pipe so that it is securely closed off.

Summary of Contents for one2clean





























Search results

Summary of Contents for one2clean

Reviews:

Related manuals for one2clean

Brands by name

Popular brands

Graf one2clean, Installation Manual

Search results

Summary of Contents for one2clean

Reviews:

Related manuals for one2clean

Brands by name

Popular brands