9.
INS
TALLA
TION
OF
AIR
HO
SE
S
&
INTERNAL
C
ONT
ROLLER
Graf UK Ltd
14
Document No. Graf-0002 Rev. 1
T: 01608 661500
|
F: 01295 211333
|
|
www.grafuk.co.uk
Installation of Air Hoses
& Internal Controller
ONE2CLEAN
Installation of Air Hoses
& Internal Controller
ONE2CLEAN
9
INSTALLATION OF AIR HOSES AND EXTERNAL CONTROLLER
* Must be installed within 18m of tank. (Air hoses are 20m in length)
Connect hoses as shown (13mm hose to red barbed
connector, 19mm hose to blue barbed connector), secure
with jubilee clips and then feed hoses through duct to
controller ensuring hoses are not kinked.
Page 1 of
2
T: 01608 661500
|
F: 01295 211333
|
|
www.grafuk.co.uk
Installation of Air Hoses & Internal Controller
*Must be installed within 18m of Tank.
Connect 13mm
hose here
Connect 19mm
hose here
Connect hoses as shown (13mm hose to red barbed
connector, blue hose to 19mm barbed connector),
secure with jubilee clips and then feed hoses through
duct to controller ensuring hoses are not kinked.
The controller must be installed in a well vented, dry
and dust-free interior. Two 8mm holes must be drilled
into the wall for assembly.
Secure the controller to the wall using the
dowels and screws provided.
Position the compressor on the controller. Connect the
compressor to the control unit pipe using the 90-degree
hose piece and hose clamps provided. Plug the compressor
plug into the control socket.
Connect the air hoses to the nozzles on the controller
(13mm hose to black nozzle and 19mm hose to blue nozzle)
and secure with jubilee clips.
The controller requires its own, permanent adequately
fused (13 amp) power supply. Fitted with an isolator
switch for repair and maintenance.
1.
2.
3.
4.
5.
6.
1
The controller must be installed in a well vented, dry and
dust-free interior. Two 8mm holes must be drilled into the
wall for assembly.
Page 1 of
2
T: 01608 661500
|
F: 01295 211333
|
|
www.grafuk.co.uk
Installation of Air Hoses & Internal Controller
*Must be installed within 18m of Tank.
Connect 13mm
hose here
Connect 19mm
hose here
Connect hoses as shown (13mm hose to red barbed
connector, blue hose to 19mm barbed connector),
secure with jubilee clips and then feed hoses through
duct to controller ensuring hoses are not kinked.
The controller must be installed in a well vented, dry
and dust-free interior. Two 8mm holes must be drilled
into the wall for assembly.
Secure the controller to the wall using the
dowels and screws provided.
Position the compressor on the controller. Connect the
compressor to the control unit pipe using the 90-degree
hose piece and hose clamps provided. Plug the compressor
plug into the control socket.
Connect the air hoses to the nozzles on the controller
(13mm hose to black nozzle and 19mm hose to blue nozzle)
and secure with jubilee clips.
The controller requires its own, permanent adequately
fused (13 amp) power supply. Fitted with an isolator
switch for repair and maintenance.
1.
2.
3.
4.
5.
6.
2
Secure the controller to the wall using the dowels and
screws provided.
Page 1 of
2
T: 01608 661500
|
F: 01295 211333
|
|
www.grafuk.co.uk
Installation of Air Hoses & Internal Controller
*Must be installed within 18m of Tank.
Connect 13mm
hose here
Connect 19mm
hose here
Connect hoses as shown (13mm hose to red barbed
connector, blue hose to 19mm barbed connector),
secure with jubilee clips and then feed hoses through
duct to controller ensuring hoses are not kinked.
The controller must be installed in a well vented, dry
and dust-free interior. Two 8mm holes must be drilled
into the wall for assembly.
Secure the controller to the wall using the
dowels and screws provided.
Position the compressor on the controller. Connect the
compressor to the control unit pipe using the 90-degree
hose piece and hose clamps provided. Plug the compressor
plug into the control socket.
Connect the air hoses to the nozzles on the controller
(13mm hose to black nozzle and 19mm hose to blue nozzle)
and secure with jubilee clips.
The controller requires its own, permanent adequately
fused (13 amp) power supply. Fitted with an isolator
switch for repair and maintenance.
1.
2.
3.
4.
5.
6.
3
Position the compressor on the controller. Connect the
compressor to the unit pipe using the 90-degreee hose
piece and hose clamps provided. Plug the compressor plug
into the control socket.
Page 1 of
2
T: 01608 661500
|
F: 01295 211333
|
|
www.grafuk.co.uk
Installation of Air Hoses & Internal Controller
*Must be installed within 18m of Tank.
Connect 13mm
hose here
Connect 19mm
hose here
Connect hoses as shown (13mm hose to red barbed
connector, blue hose to 19mm barbed connector),
secure with jubilee clips and then feed hoses through
duct to controller ensuring hoses are not kinked.
The controller must be installed in a well vented, dry
and dust-free interior. Two 8mm holes must be drilled
into the wall for assembly.
Secure the controller to the wall using the
dowels and screws provided.
Position the compressor on the controller. Connect the
compressor to the control unit pipe using the 90-degree
hose piece and hose clamps provided. Plug the compressor
plug into the control socket.
Connect the air hoses to the nozzles on the controller
(13mm hose to black nozzle and 19mm hose to blue nozzle)
and secure with jubilee clips.
The controller requires its own, permanent adequately
fused (13 amp) power supply. Fitted with an isolator
switch for repair and maintenance.
1.
2.
3.
4.
5.
6.
4
3
4
3
Connect the air hoses to the nozzles on the controller
(13mm hose to black nozzle and 19mm hose to blue nozzle)
and secure with jubilee clips.
Page 1 of
2
T: 01608 661500
|
F: 01295 211333
|
|
www.grafuk.co.uk
Installation of Air Hoses & Internal Controller
*Must be installed within 18m of Tank.
Connect 13mm
hose here
Connect 19mm
hose here
Connect hoses as shown (13mm hose to red barbed
connector, blue hose to 19mm barbed connector),
secure with jubilee clips and then feed hoses through
duct to controller ensuring hoses are not kinked.
The controller must be installed in a well vented, dry
and dust-free interior. Two 8mm holes must be drilled
into the wall for assembly.
Secure the controller to the wall using the
dowels and screws provided.
Position the compressor on the controller. Connect the
compressor to the control unit pipe using the 90-degree
hose piece and hose clamps provided. Plug the compressor
plug into the control socket.
Connect the air hoses to the nozzles on the controller
(13mm hose to black nozzle and 19mm hose to blue nozzle)
and secure with jubilee clips.
The controller requires its own, permanent adequately
fused (13 amp) power supply. Fitted with an isolator
switch for repair and maintenance.
1.
2.
3.
4.
5.
6.
5
The controller requires its own, permanent adequately
fused (13 amp) power supply. Fitted with an isolator switch
for repair and maintenance.
Page 1 of
2
T: 01608 661500
|
F: 01295 211333
|
|
www.grafuk.co.uk
Installation of Air Hoses & Internal Controller
*Must be installed within 18m of Tank.
Connect 13mm
hose here
Connect 19mm
hose here
Connect hoses as shown (13mm hose to red barbed
connector, blue hose to 19mm barbed connector),
secure with jubilee clips and then feed hoses through
duct to controller ensuring hoses are not kinked.
The controller must be installed in a well vented, dry
and dust-free interior. Two 8mm holes must be drilled
into the wall for assembly.
Secure the controller to the wall using the
dowels and screws provided.
Position the compressor on the controller. Connect the
compressor to the control unit pipe using the 90-degree
hose piece and hose clamps provided. Plug the compressor
plug into the control socket.
Connect the air hoses to the nozzles on the controller
(13mm hose to black nozzle and 19mm hose to blue nozzle)
and secure with jubilee clips.
The controller requires its own, permanent adequately
fused (13 amp) power supply. Fitted with an isolator
switch for repair and maintenance.
1.
2.
3.
4.
5.
6.
6
Page 1 of
2
T: 01608 661500
|
F: 01295 211333
|
|
www.grafuk.co.uk
Installation of Air Hoses & Internal Controller
*Must be installed within 18m of Tank.
Connect 13mm
hose here
Connect 19mm
hose here
Connect hoses as shown (13mm hose to red barbed
connector, blue hose to 19mm barbed connector),
secure with jubilee clips and then feed hoses through
duct to controller ensuring hoses are not kinked.
The controller must be installed in a well vented, dry
and dust-free interior. Two 8mm holes must be drilled
into the wall for assembly.
Secure the controller to the wall using the
dowels and screws provided.
Position the compressor on the controller. Connect the
compressor to the control unit pipe using the 90-degree
hose piece and hose clamps provided. Plug the compressor
plug into the control socket.
Connect the air hoses to the nozzles on the controller
(13mm hose to black nozzle and 19mm hose to blue nozzle)
and secure with jubilee clips.
The controller requires its own, permanent adequately
fused (13 amp) power supply. Fitted with an isolator
switch for repair and maintenance.
1.
2.
3.
4.
5.
6.
Page 1 of
2
T: 01608 661500
|
F: 01295 211333
|
|
www.grafuk.co.uk
Installation of Air Hoses & Internal Controller
*Must be installed within 18m of Tank.
Connect 13mm
hose here
Connect 19mm
hose here
Connect hoses as shown (13mm hose to red barbed
connector, blue hose to 19mm barbed connector),
secure with jubilee clips and then feed hoses through
duct to controller ensuring hoses are not kinked.
The controller must be installed in a well vented, dry
and dust-free interior. Two 8mm holes must be drilled
into the wall for assembly.
Secure the controller to the wall using the
dowels and screws provided.
Position the compressor on the controller. Connect the
compressor to the control unit pipe using the 90-degree
hose piece and hose clamps provided. Plug the compressor
plug into the control socket.
Connect the air hoses to the nozzles on the controller
(13mm hose to black nozzle and 19mm hose to blue nozzle)
and secure with jubilee clips.
The controller requires its own, permanent adequately
fused (13 amp) power supply. Fitted with an isolator
switch for repair and maintenance.
1.
2.
3.
4.
5.
6.
