Graef Concept 25, Operating Manual

Page: 50 / 156

50
6.5.3 Cleaning the slide
- Tilt the slide for cleaning
- Roughly clean the upper side of the slide from cutting material remainders.
- Then wipe off the slide using a damp cloth.
6.6 Assembly after cleaning
- Put the knife cover on the provided receptacles on the knife ring and position the upper borehole toward the
upper screw on the knife ring.
Push the tension lever down.
- Insert the top plate into the end-piece holder.
- Swivel the slide back into the working position.
- From the left side, insert the blade scraper into the dovetail guide and carefully press it into the direction of
the knife against the end stop.